CONTROLO2024: 16th APCA International Conference on Automatic Control and Soft Computing FEUP - Faculdade de Engenharia da Universidade do Porto Porto, Portugal, July 17-19, 2024 |
Conference website | https://controlo2024.pt |
Submission link | https://easychair.org/conferences/?conf=controlo2024 |
Submission deadline | May 10, 2024 |
We invite the control engineering community to submit a paper or a Session Proposal to the the 16th APCA International Conference on Automatic Control and Soft Computing (CONTROLO 2024), to be held in Porto, Portugal, from 17 to 19 July 2024. The contribution can be in the form of a submitted paper to be included in a Regular Session or a Special Session proposal.Regular sessions are within the scope of the following topics:
- Control Systems;
- Automation and Robotics;
- Soft-Computing.
To enhance the technical program and focus on specific topics and areas, CONTROLO 2024 will include Special Sessions in addition to regular ones.The working language of the conference is English.
Author Guidelines
Manuscripts should be written in English with a paper length of 10 pages (max.), including figures and tables. Up to two (2) additional pages can be accepted. Authors must adhere to the written format of the conference proceedings. Further details are in the “Information for Authors of Springer Proceedings” here. Latex and Word templates and an eBook sample can be found on the same site here.
List of Topics
Research topics of interest for submission include but are not limited to:
Control Systems
- Adaptive Control
- Aeronautics and Aerospace control
- Control Education
- Control technology, sensors and actuators
- Control Theory
- Architectures and Applications
- Discrete-event systems
- Distributed Control
- Estimation and Identification
- Fault Detection, Diagnosis and Fault Tolerant Control
- Fuzzy and Neuro-Fuzzy
- Systems and Control
- Human in the Loop Control
- Hybrid Systems
- Intelligent and AI Based Control
- Linear and Nonlinear Control
- Modelling and Simulation
- Networked Control Systems
- Optimal, Robust and Stochastic Control
- Optimization Approaches
- Remote and Virtual Laboratories
Automation and Robotics
- Automated Guided Vehicles
- Autonomous Agents
- Cyber Physical Systems
- Embedded Systems
- Factory Modelling and Automation
- Grafcet and Petri-Nets
- Human – Agent Interaction
- Human-Machine Interfaces
- Industrial Networks and Automation
- Industrial Automation
- Instrumentation
- Internet of Things and Industry 4.0
- Manufacturing systems
- Mechatronics Systems
- Mobile Robots
- Modelling of Complex Systems
- Perception and Awareness
- Process Automation
- Real-Time Systems
- Robotics
- Vision, Recognition and Reconstruction
Soft-Computing with application to Control, Automation or Robotics
- Adaptive and Dynamic Programming
- Artificial Intelligence and Pattern Recognition
- Cloud, Fog and Big Data
- Cognitive Artificial Systems
- Computational Intelligence
- Data Mining and Information Retrieval
- Data Reduction and Interpretation
- Evolution of AI Systems
- Independent and Cognitive Computing
- Intelligent Agents and Context Awareness
- Knowledge Acquisition and Representation
- Machine Learning
- Perception Intelligent Decision Systems
- Reinforcement and Deep-Learning
Approved Special Sessions
SS1. “Geometric and Analytic Methods for Nonlinear Data”
Knut Hüper, Mathematisches Institut, Julius-Maximilians-Universität Würzburg, Germany / Fátima Silva Leite, Institute of Systems and Robotics, University of Coimbra, Portugal
SS2. “Optimal Control: Theory, Methods and Applications
Sofia Lopes, Universidade do Minho, Portugal / Nathalie Khalil, SYSTEC-ARISE, Universidade do Porto
SS3. “Control in Airborne Wind Energy Systems”
Luis A. Roque, ISEP, Politécnico do Porto / Luis Tiago Paiva, SYSTEC-ARISE, Universidade do Porto
SS4. “Control in the space of probabilities and its applications”
Dmitry Karamzin, SYSTEC-ARISE, Universidade do Porto / Maxim Staritsyn, SYSTEC-ARISE, Universidade do Porto / Nikolay Pogodaev, Dipartimento di Matematica “Tullio Levi-Civita”, Universita degli studi Padova, Italy / Roman Chertovskih, SYSTEC-ARISE, Universidade do Porto
SS5. “Numerical aspects of optimization and optimal control”
Roman Chertovskih, SYSTEC-ARISE, Universidade do Porto / Silvio Gama, CMUP, Universidade do Porto
SS6. “Hybrid Techniques Applied to Modelling and Control of Engineering Systems”
Matilde Santos, University Complutense of Madrid / Jesús Enrique Sierra-García, Universidad de Burgos
SS7. “Control Applications in Robotics”
Paulo Costa, University of Porto / José Lima, Polytechnic Institute of Bragança / José Gonçalves, Polytechnic Institute of Bragança
Updated in: https://controlo2024.pt/special-sessions/
Committees
General Chair
António Pedro Rodrigues Aguiar (Faculty of Engineering, University of Porto)
Co-Chair
Maria Paula Macedo Rocha Malonek (Faculty of Engineering, University of Porto)
IPC Chair
Fernando A.C.C Fontes (Faculty of Engineering, University of Porto)
IPC Vice-chair
Paulo Tabuada, University of California at Los Angeles, USA,
Vice-Chair from Industry
Dr Bharat Chetry, Vestas Technology Centre, Porto
Organizing Committee
Adriano Carvalho (Faculty of Engineering, University of Porto)
Fernando Fontes (Faculty of Engineering, University of Porto)
Gil Gonçalves (Faculty of Engineering, University of Porto)
Margarida Ferreira (Faculty of Engineering, University of Porto)
Maria do Rosário Pinho (Faculty of Engineering, University of Porto)
Roman Chertovskikh (Faculty of Engineering, University of Porto)
Sílvio Gama (Faculty of Sciences, University of Porto)
Vítor H. Pinto (Faculty of Engineering, University of Porto)
Section Chairs
Financial: Vítor H. Pinto (Faculty of Engineering, University of Porto)
Local Arrangements: Maria do Rosário Pinho (Faculty of Engineering, University of Porto)
Publication: Roman Chertovskikh (Faculty of Engineering, University of Porto)
Publicity: Gustavo A. Andrade (Faculty of Engineering, University of Porto)
Integrated Conference Coordination Committee (ICCC)
Paulo Lopes (Faculty of Engineering, University of Porto)
Sara Costa (Faculty of Engineering, University of Porto)
International Program Committee (IPC)
Aamir Ahmad, University of Stuttgart, Germany
Alberto Cardoso, DEI/CISUC – University of Coimbra, Portugal
Alessandro Saccon, Eindhoven University of Technology, Netherlands
Alex Alcocer, Oslo Metropolitan University, Norway
Alexandra Moutinho, IDMEC/LAETA, Instituto Superior Técnico, Universidade de Lisboa, Portugal
Amélia Caldeira, School of Engineering Polytechnic of Porto, Portugal
Anastasios Tefas, Aristotle University of Thessaloniki, Greece
André Conceição, Federal University of Bahia, Brazil
André Teixeira, Uppsala University, Sweden
Aniko Costa, Universidade NOVA de Lisboa, Portugal
António Pascoal, Universidade de Lisboa, Portugal
António Ruano, CSI, FCT, Universidade do Algarve, Portugal
António Sala, Universitat Politècnica de València, Spain
António P. Moreira, Faculty of Engineering, University of Porto, Portugal
Antónios Tsourdos, Cranfield University, United Kingdom
Camelia Avram, Technical University of Cluj Napoca, Romania
Carla Viveiros, Instituto Superior de Engenharia de Lisboa (ISEL), Portugal
Carlos Balsa, Instituto Politécnico de Bragança, Portugal
Carlos Cardeira, IDMEC/LAETA, Instituto Superior Técnico, Universidade de Lisboa, Portugal
Constantino Lagoa, The Pennsylvania State University, USA
Cristian Mahulea, University of Zaragoza, Spain
Diogo Gomes, King Abdullah University of Science and Technology, Saudi Arabia
Duarte Valério, Universidade de Lisboa, Portugal
Elisa Capello, Politecnico di Torino, CNR-IEIIT, Italy
Estela Bicho, University of Minho, Portugal
Fabrício Nogueira, Universidade Federal do Ceará (UFC), Brazil
Fátima Silva Leite, University of Coimbra, Portugal
Fátima Pina, Instituto Superior de Gestão e Administração de Santarém, Portugal
Felipe Pait, University of São Paulo, Brazil
Fernanda Coutinho, Institute of Systems and Robotics, University of Coimbra, Portugal
Fernando Lizarralde, Universidade Federal do Rio de Janeiro, Brazil
Filipe Moutinho, NOVA School of Science and Technology, Portugal
Filomena Soares, Universidade do Minho, Portugal
Gabor Sziebig, UiT – The Arctic University of Norway, Norway
Grace Deaecto, UiT – The Arctic University of Norway, Norway
Hamed Khodadadi, Islamic Azad University, Iran
Hong Yue, University of Strathclyde, United Kingdom
Hyo-Sang Shin, Cranfield University / Defence Academy of the UK, United Kingdom
Izaskun Garrido, University of the Basque Country, Spain
Jan Komenda, Institute of Mathematics, Czech Academy of Sciences, Brno Branch, Czechia
Jianhua Zhang, Oslo Metropolitan University, Norway
João Paulo Coelho, Instituto Politécnico de Bragança, Portugal
João Hespanha, University of California, Santa Barbara, United States of America
João Martins, NOVA School of Science and Technology, Portugal
João Rosas, NOVA School of Science and Technology, Portugal
João M. Lemos, INESC-ID/IST, Portugal
John Ringwood, NUI Maynooth, Ireland
John Rossiter, University of Sheffield, United Kingdom
José Araujo, Ericsson Research, Sweden
José Lima, Polytechnic Institute of Bragança, Portugal
José Boaventura, UTAD University, Portugal
José Gonçalves, ESTiG-IPB, PortugalJosé Sánchez, UNED, Spain
Josenalde Oliveira, Federal University of Rio Grande do Norte, Brazil
Karl Johansson, KTH Royal Institute of Technology, Sweden
Katalin Hangos, HAS Computer and Automation Research Institute, Hungary
Katarina Zakova, FEI STU, SlovakiaKnut Hüper, University of Wuerzburg, Germany
Lorenzo Marconi, DEI-University of Bologna, Italy
Lucíola Campestrini, UFRGS, Brazil
Luís M. Camarinha-Matos, NOVA School of Science and Technology, Portugal
Manuel Arias-Montiel, Universidad Tecnológica de la Mixteca, Mexico
Manuel Braz-Cesar, Polytechnic Institute of Bragança, Portugal
Manuel Silva, ISEP-IPP and INESC TEC CRIIS, Portugal
Marcos Moreira, Universidade Federal do Rio de Janeiro, Brazil
Margarida Camarinha, University of Coimbra, Portugal
Maria Ruano, University of Algarve, Portugal
Maria Tomas Rodriguez, The City, University of London, United Kingdom
Maria Pia Fanti, Polytechnic of Bari, Italy
Mário Mendes, Instituto Superior de Engenharia de Lisboa (ISEL), Portugal
Matilde Santos, Universidad Complutense de Madrid, Spain
Mauro Mancini, Politecnico di Torino, Italy
Michael Sebek, Czech Technical University in Prague, Czechia
Michel Kinnaert, Université Libre de Bruxelles, Belgium
Miguel Ayala Botto, Universidade de Lisboa, Portugal
Mihoko Niitsuma, Chuo University, Japan
Mikulas Huba, STU Bratislava, Slovakia
Nuno Amaro, R&D Nester, Portugal
Nuno Martins, University of Maryland, USA
Oscar Barambones, University of the Basque Country, Spain
P. B. Sujit, Institute of Science Education and Research Bhopal, India
Patrícia Pena, Universidade Federal de Minas Gerais, Brazil
Paulo Costa, Faculty of Engineering, University of Porto, Portugal
Paulo Gil, Universidade NOVA de Lisboa, Portugal
Paulo Moura Oliveira, UTAD University, Portugal
Paulo Oliveira, IDMEC/LAETA, Instituto Superior Técnico, Universidade de Lisboa, Portugal
Paulo Rosa, Deimos Engenharia SA, Portugal
Paweł Martynowicz, AGH University of Science and Technology, Poland
Pedro Batista, ISR/LARSyS, Instituto Superior Técnico, Universidade de Lisboa, Portugal
Pedro Lourenço, GNC division/Space Segment and Robotics BU/GMV, Portugal
Pedro Pereira, NOVA School of Science and Technology, Portugal
Rafal Wisniewski, Aalborg University, Denmark
Ramon Vilanova, Universitat Autònoma Barcelona, Spain
Reza Gabchelo, Tampere University, Finland
Ricardo Queiros, Agostinho Neto University, Angola
Rita Cunha, ISR/LARSyS, Instituto Superior Técnico, Universidade de Lisboa, Portugal
Roberto Galeazzi, Technical University of Denmark, Denmark
Rodolfo Oliveira, NOVA School of Science and Technology, Portugal
Ron Patton, University of Hull, School of Engineering, United Kingdom
Rui Azevedo Antunes, DEE-ESTS, Instituto Politécnico de Setúbal, Portugal
Rui Barros, Faculty of Engineering, University of Porto, Portugal
Samuele Grillo, Department of Electrical Engineering, Politecnico di Milano, Italy
Sandra Ricardo, UTAD, PortugalSérgio Pequito, Uppsala University, Sweden
Silvio Simani, Dept. of Engineering, University of Ferrara, Italy
Stanimir Valtchev, NOVA School of Science and Technology, Portugal
Sylvain Bertrand, ONERA, France
Teresa Azevedo Perdicoulis, ISR, Coimbra, UTAD, Portugal
Thor I. Fossen, Norwegian University of Science and Technology, Norway
Valter Leite, CEFET-MG / Campus Divinópolis, Brazil
Vicenc Puig, Universitat Politècnica de Catalunya, Spain
Vilma Oliveira, University of São Paulo, Brazil
Vinayak Prabhu, Colorado State University, USA
Wojciech Giernacki, Poznan University of Technology, Poland
Zhan Li, Harbin Institute of Technology, China
Zita Vale, GECAD, ISEP/IPP, Portugal
Publication
The proceedings of CONTROLO 2024 will be published in the Springer Lecture Notes on Electrical Engineering and indexed by:
- EI-Compendex
- SCOPUS
- MetaPress
- Springerlink
Venue
CONTROLO 2024 will be held at Faculdade de Engenharia da Universidade do Porto located at Rua Dr Roberto Frias, sn, 4200-465 Porto, Portugal. Coordinates: 41.1780, -8.5980 (41° 10’ 40.8’’ N, 8° 35’ 52.8’’ W).
Contact
All questions about submissions should be emailed to info@controlo2024.pt
CONTROLO2024 Secretariat:
SYSTEC - Research Center for Systems & Technologies
Instituto de Sistemas e Robótica - Porto
Faculdade de Engenharia da Universidade do Porto
Rua Dr. Roberto Frias, sn, office i217, 4200-465 Porto, Portugal
Phone: (+351) 22 041 3211 e-mail: info@controlo2024.pt
Sponsors
APCA - Associação Portuguesa de Controlo Automático
ISR - Instituto de Sistemas e Robótica - Porto
FEUP - Faculdade de Engenharia da Universidade do Porto