Download PDFOpen PDF in browserEffect of Gradation and Particle Size on Correlations between DCP Index (ASTM D6951 – 03) and Relative Density for Sand7 pages•Published: July 22, 2017AbstractThis research study was mainly focus on performing dynamic cone penetration tests according to ASTM D691 - 03 with various relative density on different gradation (poorly graded and well graded) of sand. Sand samples were collected from different region of Gujarat viz. Khanpur, Sevaliya, Ahmedabad. Well graded sand samples were prepared by mixing in different proportions of sand samples collected from above locations. Dynamic cone penetration tests were carried out in Plexiglas tank (60 cm × 60 cm × 75 cm) on three different poorly graded and three different well graded sand at different relative density of 30, 50, 65, 75 %. Relative density of sand samples were determined according to IS : 2720 (Part 14) – 1983. Dry sand has been filled in tank up to 70 cm height of tank. Tamping was done with rammer (30 cm × 30 cm × 1 cm) of 9.5 kg weight to achieve desired density. Desired depth of penetration is 60 cm. Dynamic cone penetration tests were performed according to ASTM D6951-03.Keyphrases: dcp index, dry sand, dynamic cone penetration test, gradation, particle size, relative density In: C. D. Modhera, G. J. Joshi, D.P Soni, Indrajit N. Patel, A. K. Verma, L. B. Zala, S. D. Dhiman, D. R. Bhatt, Jagdish M. Rathod, Bhargav C. Goradiya, Mehfuza S. Holia and Dharita K. Patel (editors). ICRISET2017. International Conference on Research and Innovations in Science, Engineering and Technology. Selected Papers in Civil Engineering, vol 1, pages 185-191.
|