Download PDFOpen PDF in browser

Effect of Preheating on Combustion Characteristics of a Swirling Flameless Combustor

EasyChair Preprint 6940

15 pagesDate: October 27, 2021

Abstract

Flameless combustion is a state-of-the-art combustion technique that provides uniform temperature distribution while increasing efficiency and reducing emissions. An internally preheated swirling flameless burner (IPSFC) operating in flameless mode has been developed and tested to provide improved combustion characteristics and very low pollutant emissions. The IPSFC burner was operated at a heat input of 7 kW to 15 kW with a preheated combustion temperature. In the study, the effects of combustion air with and without preheating on gaseous fuel combustion characteristics are investigated for the six cases: SFR2, SFR4, SFR42, PSFR2, PSFR4 and PSFR42. The results show that the best configuration for a flameless burner is the SFR42 case, a vortex burner with four tangential air inlets, 12 axial air inlets, and 11 coaxial fuel inlets. The preheated air was found to increase the thermal efficiency of the process by about 10% compared to the process without preheating but at the cost of a small increase in NOx emissions. At an equivalence ratio of 0.8, the lowest NOx and CO emissions were found to be 3 ppm and 24 ppm, respectively. Temperature uniformity varied from 0.03 in SFR42 to 0.04 in SFR2 at different equivalence ratios.

Keyphrases: Emission, Preheat, flameless combustion, swirling

BibTeX entry
BibTeX does not have the right entry for preprints. This is a hack for producing the correct reference:
@booklet{EasyChair:6940,
  author    = {Najib Aminu Ismail and Raid Abid Alwan and Mazlan Abdul Wahid and Aminuddin Saat and Mohammed Bashir Abdulrahman},
  title     = {Effect of Preheating on Combustion Characteristics of a Swirling Flameless Combustor},
  howpublished = {EasyChair Preprint 6940},
  year      = {EasyChair, 2021}}
Download PDFOpen PDF in browser